Olympic Gallon Prep Magic 1-Step Clean and Etch Pool Surface Preparation Solution
The most important aspect of coating a pool is surface preparation. Your new coating will not adhere to even the slightest oily residue such as suntan lotion, body oils, hair spray, algae or anything that comes between the pool surface and the new coating.
Olympic Gallon Prep Magic 1-Step Clean and Etch Pool Surface Preparation Solution turns the traditional 3-step surface preparation into and easy 1-step process. Simply mix PREP MAGIC with water, clean your surface and then rinse.
- VOC Compliant
- Water Rinse to Neutralize
- Cleans Pool Filters
- Mix with Water
Used to Clean, degrease and etch surfaces prior to painting. Turns traditional 3-step process into a simple 1-step process. This product can be used on bare concrete, gunite, marcite, bare fiber-glass, plaster, and painted surfaces. Depending on the surface on gallon is enough to clean and etch up to 700 sq. ft.
For Bare Concrete, Marcite, Gunite, and Plaster: Mix 1 gallon of PREP MAGIC with 2 gallons of water. Always use a water-filled plastic container before pouring in the PREP MAGIC. This will clean and etch approximately 400 square feet.
For Bare Fiberglass and Painted Surfaces: Mix 1 gallon of PREP MAGIC with 4 gallons of water. Always use a water-filled plastic container before pouring in the PREP MAGIC. This will clean and etch approximately 700 square feet. Prep Magic also works great for cleaning dirty or clogged filter cartridges! A must have for any paint job!